codian.gif VCR 2220
host: ipvcr
Help contents > Advanced topics > Working with the event logs

Working with the event logs

If you are experiencing complex issues that require advanced troubleshooting, you may need to collect information from the IP VCR logs. Typically, you will be working with Codian Technical Support who can help you obtain these logs.

Event log

The last 2000 status messages generated by the IP VCR are displayed in the Event log page. In general these messages are provided for information, and occasionally Warnings or Errors may be shown in the Event log. The presence of such messages is not cause for concern necessarily; if you are experiencing a specific problem with the operation or performance of the IP VCR, Codian Technical Support can interpret logged messages and their significance for you.

You can:

Capture filter

The capture filter allows you to change the level of detail to collect in the Event log traces.

You should not modify these settings unless instructed to do so by Codian Technical Support.

Normally, the capture filter should be set to the default of Errors, Warnings and Information for all logging sources. There is no advantage in changing the setting of any source without advice from Codian Technical Support. The diagnostic information generated by the IP VCR can be very verbose and enabling excessive debugging without advice can cause the Event log to become full very quickly and is not advised.

Display filter

The display filter allows you to view or highlight stored Event log entries. Normally, you should not need to view or modify any of the settings on this page.


You can configure the IP VCR to send event messages to up to four syslog servers. To add or remove a syslog server, go to Events > Syslog and make the changes you require. See Logging using syslog.

H.323/SIP log

The H.323/SIP log page records every H.323 and SIP message received or transmitted from the IP VCR. The log can be exported in an .xml file. By default the H.323/SIP log is disabled because it affects performance, but Codian support may ask you to enable it if there is a problem with a unit in your network.

Related topics